TM 9-2320-272-24-l
4.
Aligning holes in thermostat housing (5) and header (1), install housing (5) with four new screw-
assembled lockwashers (11).
5.
Connect radiator bypass hose (10) to thermostat housing (5) and bypass tube (8) and tighten two
clamps (9).
6.
Connect radiator inlet hose (7) to thermostat housing (5) and tighten clamp (6).
FOLLOW-ON TASKS:
Fill cooling system to proper level (para. 3-53).
Start engine (TM 9-2320-272-10), check for coolant leaks, and check temperature
gauge for normal reading of 175F to 195F (70C to 97C).
Install right splash shield (TM 9-2320-272-10).
3-191
