TM 9-2320-272-24-1
1.
Install
elbow hose (24) on transmission oil cooler (25) with clamp (23).
2.
Install
tube (20) on elbow (24) with clamp (23).
3.
Install
elbow hose (22) on outlet port (2) and tube (20) with two clamps (21).
4.
Install
hump hose (16) on transmission oil cooler (25) with clamp (14).
5.
Install
tube (12) on hump hose (16) with clamp (14).
6.
Install
hump hose (11) on tube (12) and outlet tube (5) with two clamps (10).
NOTE
Perform step 7 for external bypass systems.
7.
Install
hose (19) on fitting (29) and tube (12) with two clamps (18).
NOTE
Perform steps 8, 9, and 10 for internal bypass systems.
8.
Install
hose (15) on tube (12) with clamp (13).
9.
Install
thermostat canister (17) on hose (15) with clamp (13).
10.
Install
hose (19) on fitting (26) and thermostat canister (17) with two clamps (18).
11.
Install
hose (6) on tube (20) with clamp (9).
12.
Install
hose (28) on surge tank fitting (1) with clamp (27).
13.
Install
hose (6) and clamp (7) on bracket (4) with screw (8) and nut (3).
14.
Install
hose (43) on heater valve (44) and fitting (46) with two clamps (42).
15.
Install
hose (41) on heater valve (45) and fitting (39) with two clamps (40).
NOTE
Wrap male pipe threads with antiseize tape before installation.
16.
Install
two elbows (36) and adapter (33) on radiator (37).
17.
Install
hose (49) on surge tank (47) and thermostat housing (38) with two clamps (48).
18.
Install
hose (30) on adapter (33) and surge tank (47).
19.
Install
clamp (32) and hose (30) on bracket (35) with screw (31) and new locknut (34).
CAUTION
When filling cooling system, ensure drainvalve on aftercooler is
open. Failure to do so may result in damage to equipment.
3-146
