TM 9-2320-272-272-24-1
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
TM 9-2320-272-10
M939A2
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Hood raised and secured (TM 9-2320-272-10).
MATERIALS/PARTS
Right splash shield removed (TM 9-2320-272-10).
Cooling system drained (para. 3-53).
Locknut (Appendix D, Item 306)
Antiseize tape (Appendix C, Item 72)
NOTE
If removal of tiedown straps is necessary, note location for
installation.
1.
Remove locknut (5), screw (2), clamp (3), and hose (1) from bracket (6). Discard locknut (5).
2.
Disconnect hose (1) from adapter (4) and surge tank (18).
3.
Remove two clamps (19) and hose (20) from surge tank (18) and thermostat housing (9).
4.
Remove adapter (4) and two elbows (7) from radiator (8).
5.
Remove two clamps (12) and remove hose (13) from heater valve (16) and fitting (10).
6.
Remove two clamps (11) and remove hose (14) from heater valve (15) and fitting (17).
7.
Remove nut (23), screw (28), clamp (27), and hose (26) from bracket (24).
8.
Remove clamp (47) and hose (48) from surge tank fitting (21).
9.
Remove clamp (29) and hose (26) from tube (40).
NOTE
Perform steps 10 and 11 for internal bypass systems.
10.
Remove two clamps (36) and hose (37) from fitting (46) and thermostat canister (35).
11.
Remove two clamps (38), hose (39), and thermostat canister (35) from tube (32).
NOTE
Perform step 12 for external bypass systems.
12.
Remove two clamps (36) and hose (37) from fitting (49) and tube (32).
13.
Remove two clamps (30) and hump hose (31) from outlet tube (25) and tube (32).
14.
Remove two clamps (33) and tube (32) and hump hose (34) from transmission oil cooler (45).
15.
Remove two clamps (41) and elbow hose (42) from outlet port (22) and tube (40).
16.
Remove two clamps (43) and elbow hose (44) and tube (40) from transmission oil cooler (45).
3-164
