TM 9-2320-272-24-1
3-42. ACCELERATOR LINKAGE (M939/A1) MAINTENANCE (Contd)
NOTE
Assistant will help with steps 3 through 8.
3.
Push throttle lever (7) forward to FULL THROTTLE position.
4.
Pull clevis rod (1) forward as far as possible.
6.
Loosen jamnut (9) and hand-turn accelerator rod (5) to shorten or lengthen as needed to align holes
in clevis rod (1) and throttle lever (7).
6.
Install clevis (1) on throttle lever (7) with new screw (6) and new locknut (2).
7.
Tighten jamnut (9) against ball joint (10).
8.
Connect return spring (8) to accelerator rod (6) and link assembly (12).
FOLLOW-ON TASK: Install left splash shield (TM 9-2320-272-10).
3-125
