TM 9-2320-272-24-1
3-27. FUEL TANK (M936/A1/A2) MAINTENANCE (Contd)
18.
Install ground wire (37) on frame (5) and double check valve (34) with new lockwasher (38),
washer (36), screw (35), and new locknut (33).
19.
Loosen two nuts on screws (40) and slide stop plate (41) upward.
20.
Install outrigger (42) in wrecker body (39) and slide stop plate (41) down. Stop plate (41) must
contact back of slot in top of outrigger (42).
21.
Tighten two nuts on screws (40).
RIGHT SIDE
LEFT SIDE
FOLLOW-ON TASKS: Start engine (TM 9-2320-272-10) and road test vehicle.
3-91
