TM 9-2320-272-24-1
3-27. FUEL TANK (M936/A1/A2) MAINTENANCE (Contd)
NOTE
Tag fittings and transmitter unit for direction during installation.
Remove fuel supply tube and elbow (5) from top of fuel tank (8).
16.
Remove vent line elbows (7) and (9) from top of fuel tank (8).
17.
Remove return line elbow (6) from top of fuel tank (8).
18.
Remove screw (2) and ground wire (3) from fuel transmitter unit (4).
19.
Remove four screws (2), fuel transmitter unit (4), and gasket (11) from fuel tank (8). Discard
20.
gasket (11).
Remove filler cap (1) and disconnect S-chain (13) from fuel strainer (12).
21.
Remove fuel strainer (12) and gasket (10) from fuel tank (8). Discard gasket (10).
22.
c. Inspection
Inspect fuel tank (8) for cracks, holes, and stripped threads (FM 43-2).
d. Installation
NOTE
Male pipe threads must be wrapped with antiseize tape before
installation.
1.
Install new gasket (10) and fuel strainer (12) in fuel tank (8).
2.
Connect S-chain (13) to fuel strainer (12) and install filler cap (1).
NOTE
Do not us screw hole nearest to vehicle frame.
3.
Install new gasket (11) and fuel transmitter unit (4) on fuel tank (8) with four screws (2).
4.
Install ground wire (3) on fuel transmitter unit (4) with screw (2).
5.
Install return line elbow (6) and vent line elbows (7) and (9) on top of fuel tank (8).
3-88
