TM 9-2320-272-24-1
3-28. FUEL TANK HANGERS AND RETAINING STRAPS MAINTENANCE (Contd)
1.
Inspect two rubber sheets (16) and (17) for presence and damage. Replace if missing or damaged.
2.
Inspect two insulators (1) for deterioration. Replace if missing or damaged.
c. Installation
Apply adhesive sealant to two insulators (1) and install as needed, on retaining straps (22).
1.
Apply adhesive sealant to two rubber sheets (16) and rubber sheets (17) and install, as needed, on
2.
hangers (14).
NOTE
Assistant will help with step 2.
Install two fuel tank hangers (14) on frame (7) with eight screws (18) and new locknuts (2).
3.
Place wiring harness bracket (5) over wiring harness and install new lockwasher (4), ground wire (20),
4.
washer (3), screw (21), washer (3), new lockwasher (4), wiring harness bracket (5), and new locknut (6)
on frame (7).
Install two support brackets (10) on hangers (14) with four screws (11) and new locknuts (9).
5.
Install two fuel hanger stabilizing straps (12) on hangers (14) with eight screws (15) and new
6.
locknuts (13).
Install two retaining straps (22) and insulators (1) on hangers (14) with two screws (8) and new
7.
locknuts (19).
3-94
