TM 9-2320-260-34-2
16-31. CABLE HOIST WINCH REPLACEMENT (M819) (Cont'd)
Remove three nuts (22), lockwashers (21), and screws (19) from drum housing (18) and bracket (20).
7.
Discard lockwashers (21). Lift cable hoist winch (16) from shipper (23) to work area.
Remove chains from drive housing (15), drum (17), and lifting device.
8.
Remove four nuts (3o), bearing cap (31), and gasket (32) from drum housing (18). Discard
9.
gasket (32).
Remove locknut (33) and thrust washer (34) from shaft (27). Discard locknut (33).
10.
Remove bearing cap (29), spacer (35), and gasket (28) from drum housing (18). Discard gasket (28).
11.
NOTE
Assistant will help with step 12.
Using puller, separate and remove drum housing (18) and drum (17) from cable hoist winch (16) and
12.
shaft-(27).
16-179
