TM 9-2320-260-34-2
16-29 CRANE CAB (GONDOLA) REPLACEMENT (M 819)
THIS TASK COVERS:
b. Installation
a. Removal
lNITIAL SETUP
EQUIPMENT CONDITION
APPLICABLE MODELS
Parking brake set (TM 9-2320-260-10).
M819
Cab door sliding windows removed
TOOLS
(TM 9-2320-260-20).
General mechanic's tool kit
Cab side window removed (TM 9-2320-260-20).
Cab stationary window removed
1-5116-in. open-end wrench
(TM 9-2320-260-20).
1-7/16-in. open-end wrench
Hydraulic lines and hoses (in cab) disconnected
1-lJ2-in. open-end wrench
Spare tire removed (TM 9-2320-260-10).
Operator's seat cushion removed
(TM 9-2320-260-20).
Lifting device
Chains
Cab door and steps removed (TM 9-2320-260-20).
Floodlights removed (TM 9-2320-260-20).
MATERIALS/PARTS
Floodlight electrical harness removed
(TM 9-2320-260-20).
Fire extinguisher and bracket removed
(TM 9-2320-260-20).
PERSONNEL REQUIRED
GENERAL SAFETY INSTRUCTIONS
Two
All personnel must stand clear during lifting
operations.
REFERENCES (TM)
Ensure lifting capacity is greater than the weight
TM 9-2320-260-10
of the cab.
TM 9-2320-260-20
TM 9-2320-260-34P-2
WARNING
All personnel must stand clear during lifting operations. A
swinging or shifting load may cause injury or death to personnel.
Ensure lifting capacity is greater than weight (500 lb (227 kg)) of
cab. Failure to do so may result in injury to personnel or damage
1. Attach chains to cab (1) and lifting device. Remove slack from chain.
2. Remove four nuts (5), lockwashers (4), and screws (3) from cab (1) and boom (2). Discard
lockwashers (4).
3. Remove four screws (9) and Iockwashers (8), and bracket ( 10) from cab (1) and boom (2). Discard
lockwashers (8).
4.
Remove two screws (7) and lockwashers (6), and cab (1) from boom (2). Place cab (1) on wooden
supports. Discard lockwashers (6).
5. Remove chain from cab (1) and lifting device.
1. Attach chain to cab (1) and lifting device.
16-174