TM 9-2320-260-34-2
16-22. CRANE GONDOLA MAINTENANCE (M816) (Contd)
Attach chain to lifting device and gondola body (2).
1.
WARNING
All personnel must stand clear during lifting operations.
q
A swinging or shifting load may cause injury to personnel.
Ensure lifting capacity is greater than weight (500 lb (227 kg))
q
of crane gondola. Failure to do so may result in injury to per-
sonnel or damage to equipment.
NOTE
Assistant will help with steps 2 and 3.
2.
Position gondola body (2) near boom support (1) and route two hoses (11) through bracket (16) and
into gondola body (2).
Install gondola body (2) on boom support (1) using twelve new lockwashers (5) and screws (4).
3.
Tighten screws (4) 44-61 lb-ft (60-83 Nm).
4.
Remove chain from lifting device and gondola body (2).
5.
Route four hoses (15) through bracket (16) and into gondola body (2).
Install hoses (11) and (15) on brackets (14) and (16) with three clamps (9) and (13) and new
6.
locknuts (10) and (12).
Install tube (8) and hose (7) on crossover tee ( 17).
7.
Install gondola guard (6) on gondola body (2).
8.
16-136
