TM 9-2320-260-34-2
16-4. FRONT WINCH CABLE TENSlONER MAINTENANCE
THIS TASK COVERS:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning and Inspection
INITIAL SETUP
APPLICABLE MODELS
MATERIALS/PARTS (Contd)
M816
GAA grease (Appendix C, Item 14)
Lubricating oil (Appendix C, Item 21)
TOOLS
General mechanic's tool kit
REFERENCES (TM)
(Appendix B, Item 1)
LO 9-2320-260-12
Soft-head hammer (Appendix B, Item 47)
TM 9-2320-260-10
TM 9-2320-260-20
MATERlALS/PARTS
TM 9-2320-260-34P-2
Eight Iockwashers (Appendix D, Item 216)
Woodruff key (Appendix D, Item 557)
EQUIPMENT CONDITION
Four felt washers (Appendix D, Item 532)
q Parking brake set (TM 9-2320-260-10).
q Winch cable removed (TM 9-2320-260-20).
1. Remove four nuts (1), lockwashers (2), and screws (5) from roller (4) and cable tensioner (14).
Discard lockwashers (2).
2. Remove cable tensioner (14), shim (7), and spacer plate (6) from roller (4).
b. Disassembly
1. Remove two grease fittings (3) from cable tensioner (14) shafts ( 12) and (13).
2. Remove setscrew (10), handle (9), and woodruff key (8) from shaft (12). Discard woodruff key (8).
3. Loosen poppet nut (17) and remove poppet unit (11) from handle (9).
4. Remove nut (15), latch (16), poppet nut (17), and spring (18) from poppet (19).
16-28
