TM 9-2320-260-34-2
16-2. FRONT WINCH REPAIR (Contd)
g. Winch Assembly
NOTE
Assistant will help with step 1.
1. Turn gearcase (30) to the ground so drum shaft (31) is vertical.
WARNING
Stabilize winch while sitting vertical. Failure to do so may result
in injury to personnel.
2. Install new seal (33) and thrust washer (27) on drum (28).
3. Install drum (28) on drum shaft (31).
4. Install two new woodruff keys (32) on drum shaft (31).
5. Install tie rod (29) on gearcase (30).
6. Install clutch (37), thrust ring (38), and sleeve (39) on drum shaft (31).
7. Install spring (35) and drag brake (36) in end frame (2) with setscrew (34).
8. Install end frame (2) on drum (28), drum shaft (31), and tie rod (29). Ensure grooves in sleeve (39)
engage shift fork (8).
9. Install nut (40) on tie rod (29).
16-15
