TM 9-2320-260-34-2
16-2. FRONT WINCH REPAIR (Contd)
14. Apply sealing compound to outer edge of new seal (4) and install seal (4) on cover (7).
15. Install new gasket(s) (3) and cover (7) on gearcase (1) with four new lockwashers (6) and screws (5).
16. Check endplay of wormshaft (2).
a. Install dial indicator on gearcase (1) and position plunger on head of screw (8).
b. Push wormshaft (2) toward brake housing (9) and set dial indicator to zero.
c. Pull wormshaft (2) away from brake housing (9) and record dial indicator reading.
d. Endplay of wormshaft (2) should be 0.005-0.015 in. (0.13-0.38 mm).
e. If endplay is not within limits, remove cover (7) and add or remove gasket(s) (3). Repeat step 16
until endplay is correct.
f. Remove dial indicator from gearcase (1).
17. Install new gasket (10) and cover (11) on brake housing (9) with six new screw-assembled
16-12