TM 9-2320-260-34-2
16-2. FRONT WINCH REPAIR (Contd)
f. End Frame Assembly
1.
Apply sealing compound to outer edge of new seal (17). Install seal (17) on end frame (2).
Insert shifter shaft (16) in end frame (2).
2.
Install new woodruff key (9) on shifter shaft (16) and drive shifter shaft (16) into shift fork (8) with
3.
soft-head hammer.
Install setscrew (18) on shift fork (8).
4.
Install lock (3) on end frame (2) with two washers (6), new lockwashers (5), and screws (4).
5.
Install new woodruff key (11) on shifter shaft (16).
6.
Install spring (13) and ball (12) in shifter handle (14).
7.
Install shifter handle (14) on shifter shaft (16). Ensure ball (12) rests in detents on lock (3). Install
8.
setscrew (15) in shifter handle (14).
Apply sealing compound to outer edge of new seal (10) and install on end frame (2).
9.
Install pipe plugs (7) and (19) on end frame (2).
10.
Install shoulder pin (20), spring (21), spacer (22), bolt (23), and latch (24) on end frame (2) with
11.
nut (25) and jamnut (26).
Coat new expansion plug (1) with sealing compound. Install new expansion plug (1) on end
12.
frame (2).
16-14
