TM 9-2320-260-34-2
15-40. CEILING REAR COVER REPLACEMENT (M820A1 )
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-260-10
M820A1
TM 9-2320 -260-34P-2
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit
Parking brake set (TM 9-2320-260-10).
(Appendix B, Item 1)
Van body sides fully expanded and secured
MATERIALS/PARTS
(TM 9-2320-260-10).
Fibrous glass felt insulation
GENERAL SAFETY INSTRUCTIONS
Gloves, eyeshields, and dust mask must be worn
Adhesive (Appendix C, Item 2)
during rear cover replacement.
Primer (Appendix C, Item 31)
WARNING
Van body is insulated with fibrous glass felt insulation. Gloves,
eyeshields, and dust mask must be worn during rear cover
replacement, Failure to do so may result in injury to personnel.
Remove eight screws (3), thirty-two screws (4), and rear cover (5) from rear header (2) and air duct (1).
Insulate areas of metal-to-metal contact with zinc chromate
primer.
Apply adhesive to metal surfaces.
lnsulate entire structure with fibrous glass felt insulation.
Install rear cover (5) on air duct (1) and rear header (2) with thirty-two screws (4) and eight screws (3).
FOLLOW-ON TASK: Retract van body sides (TM 9-2320-260-10).
15-157
