TM 9-2320-260-34-2
15-33. HINGED END PANEL MAINTENANCE (Contd)
NOTE
All hinged end panels are assembled the same. This procedure
covers the right-rear hinged end panel.
q Seal all exterior joints with sealing compound.
q Perform steps 1 and 2 if skins were removed.
q Assistant will help with steps 1 and 2.
1. Install inner skin (22) on panel frame (7) with thirty screws (23) and eighteen screws (2 1).
2. Install outer skin (12) on panel frame (7) with twelve new rivets (11).
3. Install spacer plate (13) and strap (14) on outer skin (12) with two screws (15).
4. Install channels (5) and (16) on outer skin (12), panel frame (7), and inner skin (22) with eighteen
new rivets (6) and twenty screws (17).
5. Install new seal (4) and retainers (2) and (3) on channel (5) with ten screws (1).
6. Install new seal (8) and retainer (10) on outer skin (12) and panel frame (7) with twenty-seven
screws (9).
7. Install new seal (20) and hinge (19) on outer skin (12) and panel frame (7) with sixteen screws (18).
Install hinged end panel (25) on side panel (24) with sixteen screws (26).
15-116
