TM9-2320-260-34-1
5-15. FUEL PUMP SHUTOFF VALVES REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
lNITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-260-10
TM 9-2320-260-20
TOOLS
TM 9-2320-260-34P-1
General mechanic's tool kit
EQUIPMENT CONDITION
(Appendix B, Item 1)
Hood raised and secured (TM 9-2320-260-10).
MATERIALS/PARTS
Z Battery ground cable disconnected
O-ring (Appendix D, Item 276)
(TM 9-2320-260-20).
Two lockwashers (Appendix D, Item 233)
GENERAL SAFETY INSTRUCTIONS
Diesel fuel is flammable. Do not perform this task
near open flame,
WARNING
Diesel fuel is flammable. Do not perform fuel system procedures
near open flame. Injury to personnel may result.
1. Loosen screw (1) and remove nut (2) and emergency shutoff cable (6) from fuel shutoff lever (3).
2. Remove fuel supply tube (4) from manual shutoff valve (5).
3. Remove nut (11) and wires (10) from shutoff solenoid (14).
4. Remove two screws (7), lock washers (8), washers (9), shutoff solenoid (14), and O-ring (12) from fuel
pump (13). Discard lockwashers (8) and O-ring (12).
5. Remove manual shutoff valve (5) from shutoff solenoid (14).
