TM9-2320-260-34-1
5-16. PULSATION DAMPER MAINTENANCE (Contd)
1. Place new nylon washer (12) on plate (13).
2. Place new O-ring (9), new disk (10), and new O-ring (11) on damper body (14).
3. Install plate (13) on damper body (14) with two new lockwashers (8) and screws (7).
e. Installation
1. Place new seal (2) on pulsation damper (3).
2. Install pulsation damper (3) on fuel pump (1) with two washers (4), new lockwashers (5), and
screws (6).
FOLLOW-ON TASK: Remove fuel pump from holding fixture (para. 5-14).
5-46