TM 9-2320-260-34-1
5-11. FLOW TEST (Contd)
1. Remove plunger (9) from injector (8).
2. Install spring (10) and plunger (9) in injector (8).
3. Install retainer plate (13) on burnishing tool adapter (5) with two pins (11).
NOTE
Use test stand link 6.5 in. (17 cm) long.
4. Place test stand link (12) in burnishing tool adapter (5).
5. Position injector (8) in injector seat (14) on test stand (15).
5-31