TM9-2320-260-34-1
5-11. FLOW TEST (Contd)
32. Remove test stand link (2) from burnishing tool adapter (5).
33. Remove two pins (1), retainer plate (3), and burnishing tool adapter (5 )from tests stand (6).
34. Remove locking screw (4 )and injector (9) from adapter( 5).
35. Install new screen (8) on injector (9) with new retainer ring (7).
NOTE
Perform step 36 for non-top stop injector.
36. Install spring (11) and plunger (10) in injector (9).
NOTE
Perform steps 37 and 38 for top stop injector.
37. Install plunger spring (11), spring retainer (14), and plunger (10) on injector (3).
38. Using adjusting wrench and locknut wrench, install adjusting screw (13) and locknut (12) on
injector (9).
FOLLOW-ON TASK: Install injector (para. 5-6).
5-36
