TM 9-2320-260-34-1
3-50. CYLINDER LINERS AND CYLINDER BLOCK MAINTENANCE (Contd)
NOTE
Pipe plugs, cap plugs, and suction flange plate are installed at
this time to keep passages clean. Wrap male pipe threads with
antiseize tape to prevent leakage.
27. Install pipe plugs (2), (3), and new expansion plugs (4) and (16) on cylinder block (1). Tighten pipe
plugs (2) and (3) 45-55 lb-ft (61-75
28. Install eight pipe plugs (5) on cylinder block (1).
29. Install new gasket (6), and flange (7) on cylinder block (1) with two new lockwashers (8) and
screws (9).
30. Install washer (12) and pipe plugs (11) and (10) on cylinder block (1).
31. Install three pipe plugs (13) on cylinder block (1). Tighten pipe plug (13) 15-20 lb-ft (20-27
32. Install five pipe plugs (14) on cylinder block (1). Tighten pipe plugs (14) 35-45 lb-ft (47-61
33. Install pipe plug (15) on cylinder block (1). Tighten pipe plug (15) 15-20 lb-ft (20-27 N-m).
3-144
