TM 9-2320-260-20
THIS TASK COVERS:
a.
Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
M817
TM 9-2320-260-10
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Four locknuts
Parking brake set (TM 9-2320-260-10).
Convoy warning light removed (para. 14-58).
1. Disconnect cable (8) from harness (7).
2. Pull cable (8) from mounting bracket (11), support tube (2), and mounting plate (1).
3. Loosen wing screw (3) and remove support tube (2) from mounting bracket (11).
4. Remove mounting plate (1) from support tube (2).
5.
Remove four locknuts (5), screws (10), washers (4) and (9), and mounting bracket (11) from
cab protector (6). Discard locknuts (5).
1.
Install mounting bracket (11) on cab protector (6) with four washers (4) and (9), screws (10),
and new locknuts (5).
Install mounting plate (1) on support tube (2).
2.
3. Insert cable (8) through mounting plate (1), support tube (2), and mounting bracket (11).
4. Install support tube (2) on mounting bracket (11) with wing screw (3).
5.
Connect cable (8) to harness (7).
14-102
