TM 9-2320-260-20
I
THIS TASK COVERS:
c. Installation
a. Removal
b. Adjustment
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
M816, M819
TM 9-2320-260-10
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Gasket
Six screw-assembled lockwashers
Parking brake set (TM 9-2320-260-10).
1. Remove six screw-assembled lockwashers (1), cover (2), and gasket (3) from brake housing case (4).
Discard gasket (3) and screw-assembled lockwashers (1).
2. Clean gasket (3) remains from brake housing case (4).
Adjust screw (5) until gap between housing (4) wall and brake band (6) is 1-3/16 to 1-1/4 in. (30-32 mm).
Install new gasket (3) and cover (2) on brake housing case (4) with six new screw-assembled
lockwashers (1).
13-98
