TM 9-2320-260-20
I
THIS TASK COVERS:
a . Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
M816
TM 9-2320-260-10
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Locknut
Cotter pin
Parking brake set (TM 9-2320-260-10).
Two lockwashers
locknut (7) and washer (8) from stud (10). Discard locknut (7).
1.
Remove
2.
Remove
cotter pin (5) from retaining pin (6). Discard cotter pin (5).
retaining pin (6) and clevis yoke (9) from lever (4).
3.
Remove
4.
Remove
lever (4) from stud (10).
Remove
stud (10) from selector plate (1).
5.
indicator point (2) from stud (3).
6.
Remove
stud (3) from lever (4).
7.
Remove
two nuts (14), lockwashers (13), screws (11). and selector plate (1) from mounting
8.
Remove
bracket
(12). Discard lockwashers (13).
1. Install selector plate (1) on mounting bracket (12) with two screws (11), new lockwashers (13),
and nuts (14).
2. Install stud (3) on lever (4).
3. Install indicator point (2) on stud (3).
4. Install stud (10) on selector plate (1).
5. Position lever (4) on stud (10).
6. Install clevis yoke (9) on lever (4) with retaining pin (6) and new cotter pin (5).
7. Install washer (8) and new locknut (7) on stud (10).
13-92
