TM 9-2320-260-20
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
EQUIPMENT CONDITION
M816 W/W, M819 W/W, M821 W/W
Parking brake set (TM 9-2320-260-10).
Winch cable, chain, and hook removed
MATERIALS/PARTS
Four lockwashers
Woodruff key
REFERENCES (TM)
LO 9-2320-260-12
TM 9-2320-260-10
TM 9-2320-260-20P
1. Remove four nuts (1), lockwashers (2), screws (4), spacers (5) and (6), and tensioner (11) from
winch (3). Discard lockwashers (2).
2. Remove setscrew (9), poppet latch (10), handle (8), and woodruff key (7) from tensioner (11). Discard
woodruff key (7).
3. Remove lubrication fittings (12) and (13) from tensioner (11).
I
b. Installation
1. Install lubrication fittings (12) and (13) on tensioner (11).
2. Install new woodruff key (7), handle (8), and poppet latch (10) on tensioner (11) with setscrew (9).
3. Install tensioner (11) and spacers (5) and (6) on winch (3) with four screws (4), new lockwashers (2),
and nuts (1).
13-26
