TM 9-2320-260-20
I
THIS TASK COVERS:
d. Rear Chock Anchor Bracket Installation
a. Front Chock Anchor Bracket Removal
b. Front Chock Anchor Bracket Installation
e. Flank Chock Anchor Bracket Removal
f. Flank Chock Anchor Bracket Installation
c. Rear Chock Anchor Bracket Removal
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
M816
TM 9-2320-260-10
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Three locknuts (front)
Parking brake set (TM 9-2320-260-10).
Three locknuts (rear)
Four locknuts (flank)
a. Front Chock Anchor Bracket Removal
1. Remove locknut (2) and screw (10) from bracket (1) and front chock anchor bracket (8). Discard
locknut (2).
2. Remove locknut (3) and screw (9) from rail (7) and front chock anchor bracket (8). Discard
locknut (3).
3. Remove locknut (4), washer (5), screw (6), and front chock anchor bracket (8) from rail (7). Discard
locknut (4).
b. Front Chock Anchor Bracket Installation
1. Install front chock anchor bracket (8) on rail (7) with screw (6), washer (5), and new locknut (4).
2. Install front chock anchor bracket (8) on rail (7) with screw (9) and new locknut (3).
3. Install screw (10) and new locknut (2) on front chock anchor bracket (8).
c. Rear Chock Anchor Bracket Removal
Remove locknuts (15), (18), and (19), screws (16), (13), and (20), and rear chock anchor bracket (17) from
rail (21). Discard locknuts (15), (18), and (19).
d. Rear Chock Anchor Bracket Installation
Install rear chock anchor bracket (17) on rail (21) with screws (16), (13), and (20) and new
locknuts (15), (18), and (19).
e. Flank Chock Anchor Bracket Removal
Remove four locknuts (14), screws (11), and flank chock anchor bracket (12) from rail (21). Discard
locknuts (14).
f. Flank Chock Anchor Bracket Installation
Install flank chock anchor bracket (12) on rail (21) with four screws (11) and new locknuts (14).
10-10
