TM 9-2320-260-20
9-12. DRAG LINK REPLACEMENT (Contd)
5. Install two new ball seats (4) and (12), new spring (3), new safety plug (2), and new adjusting
plugs (1) and (11) into drag link (19).
6. Lubricate drag link (19) (LO 9-2320-260-12).
7. Tighten adjusting plugs (1) and (11), then back off adjusting plugs (1) and (11) until holes aline.
Install new cotter pins (6) through drag link (19) and adjusting plugs (1) and (11).
8. Close and hook tabs on two dust shields (16).
9-33
