TM 9-2320-260-20
THIS TASK COVERS:
c. Installation
a. Removal
b. Cleaning and Inspection
INITIAL SETUP
EQUIPMENT CONDITION
APPLICABLE MODELS
Parking brake set (TM 9-2320-260-10).
All
GENERAL SAFETY INSTRUCTIONS
MATERIAL/PARTS
Keep fire extinguisher nearby when using
Drycleaning solvent (Appendix C, Item 29)
drycleaning solvent.
Rags (Appendix C, Item 22)
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-20P
a. Removal
Remove breather (1) from axle housing (2).
I
b. Cleaning and Inspection
WARNING
Drycleaning solvent is flammable and will not be used near open
flame. Use only in well-ventilated places. Failure to do so may
result in injury to personnel.
1. Clean breather (1) with drycleaning solvent and dry with a clean rag.
2. Press breather (1) to confirm free movement of the breather crimp cap is under spring tension.
Replace breather (1) if clogged, or no spring action is evident.
c. Installation
Install breather (1) in axle housing (2).
7-26
