TM 9-2320-260-20
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
EQUIPMENT CONDITION
APPLICABLE MODELS
Parking brake set (TM 9-2320-260-10).
M818, M819
Air reservoirs drained (TM 9-2320-260-10).
MATERIALS/PARTS
q Battery ground cable disconnected (para. 4-48).
Locknut
GENERAL SAFETY INSTRUCTIONS
Antiseize tape (Appendix C, Item 30)
Do not discomect air lines before draining air
REFERENCES (TM)
reservoirs.
TM 9-2320-260-10
TM 9-2320-260-20P
WARNING
Do not disconnect air lines before draining air reservoirs. Small
parta under pressure may shoot out with high velocity, causing
injury to personnel.
a. Removal
1. Disconnect wire (6) from lead (7).
2. Disconnect two tubes (1) and (5) from switch (8).
3. Remove locknut (3), screw (4), and switch (8) from bracket (2). Discard locknut (3).
b. Installation
1. Apply antiseize tape to male threads of two tubes (1) and (5).
2. Install switch (8) on bracket (2) with screw (4) and new locknut (3).
3. Connect two tubes (1) and (5) to switch (8).
4. Connect wire (6) to lead (7).
4-52
