TM 9-2320-260-20
I
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
EQUIPMENT CONDITION
APPLICABLE MODELS
q Parking brake set (TM 9-2320-260-10).
All
q Air reservoirs drained (TM 9-2320-260-10).
GENERAL SAFETY INSTRUCTIONS
Two
Do not disconnect air lines before draining air
Antiseize tape (Appendix C, Item 30)
reservoirs.
REFERENCES
TM 9-2320-260-10
TM
WARNING
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
I
a. Removal
I
q
Disconnect leads (1) and (6) from switch (4).
1.
2. Disconnect air line (7) from elbow (8).
3. Remove two screws (2),
(3), and switch (4) from
(5). Discard
(3).
4. Remove elbow (8) from switch (4).
b.
Installation
1. Apply anti seize tape to male threads of elbow (8).
2. Install elbow (8) on switch (4).
(5) with two new
(3) and screws (2).
3. Install switch (4) on
4. Connect air line (7) on elbow (8).
5. Connect leads (1) and (6) to switch (4).
4-50
