TM 9-2320-211-20
DC VOLTAGE TEST
(USED TO MEASURE BATTERY
VOLTAGE, VOLTAGE DROPS, OR
DC VOLTAGE AT TEST POINTS.)
1. SET SCALE SELECTOR ON +Dc.
2. SET RANGE SELECTOR ON 50V,
3. CONNECT NEGATIVE LEAD (BLACK)
TO VEHICLE FRAME, ENGINE, OR
OTHER NEGATIVE TEST POINT
STATED IN TEST PROCEDURE.
4. TOUCH POSITIVE LEAD (RED) TO
TEST POINT STATED IN TEST PROCEDURE.
NEEDLE SHOULD MOVE TOWARD CENTER
OF SCALE TO INDICATE VOLTAGE.
AT 27531