TM 11-7440-293-14
4-33. DC/DC SWITCH.
Installation instructions for DC/DC switch are given in this section.
Installing DC/DC Switch
DC/DC Switch routing of cables
4-34. INSTALLING DC/DC SWITCH.
This task covers:
Installation
INITIAL SETUP
Tools
Personnel Required
1/2-inch box wrench
One mechanic
Materials/Parts
Equipment Condition
Tacfire rack installed.
5/16-24 x 3/4 inch long hex head screws
(4 required)
5/16-inch Iockwasher (4 required)
5/16-inch flat washer (4 required)
DC/DC switch
ACTION
REMARKS
LOCATION
ITEM
1. Curbside, extending
Put DC/DC switch on wall support and aline
DC/DC switch (1)
wall support
and wall
holes.
support (2)
Screw (3), lock-
Install, handtighten.
2.
There are four screws. Step 2 is
washer (4) and
flat washer (5)
typical for all four screws.
Do step 2 again.
Screw holes (6)
3.
4.
Screw (3)
Using 1/2-inch box wrench, tighten.
There are 4 screws. Step 4 is
typical for ail four screws.
5.
Screws (3)
Do step 4 again.
4-62
