TM 11-7440-293-14
4-30. INSTALLING TACFIRE RACK.
This task covers:
Installation
INITIAL SETUP
Tools
Personnel Required
1/2-inch box wrench
Two mechanics
Materials/parts
Equipment Condition
5/16-18 x 1 inch long hex head screw
Tacfire rack assembled. Mounting
(6 required)
holes predrilled. Rivnuts installed.
5/16-18 x 1 1/2 inch long hex head screw
(8 required)
5/16-inch Iockwasher (14 required)
5/16-inch flat washer (14 required)
ACTION
LOCATION
ITEM
REMARKS
NOTE
A helper will be needed to set tacfire rack against forward
wall.
1. Forward wall
Tacfire rack (1)
Put tacfire rack against forward wall and
aline mounting holes.
2. Radio mount
Screw (2), lock-
Install, handtighten.
washer (3) and
There are eight screws. Step 2 is
flat washer (4)
typical for all eight screws.
3.
Screw holes (5)
Do step 2 again.
4. Wall support
Screw (6), lock-
Install, handtighten.
washer (7) and
There are six screws. Step 4 is
flat washer (8)
typical for all six screws.
5.
Screw holes (9)
Do step 4 again.
4-56
