TM 11-7440-293-14
4-13. INSTALLING ANGLE BRACKETS ON PP-4763 POWER SUPPLY.
This task covers:
Installation
INITIAL SETUP
Tools
Personnel Required
7/16-inch box wrench
One mechanic
Materials/parts
Equipment Condition
PP-4763 power supply
Parts unpacked.
Angle brackets, (2 required)
ACTION
LOCATION
ITEM
REMARKS
NOTE
Do not remove wooden runners from power supply.
Use existing hardware to install angle brackets.
1. Right side of
Screw (1) and
Using 7/16-inch box wrench, remove.
power supply
Iockwasher (2)
There are three screws. Step 1 is
typical for all three screws.
2.
Screws (3)
Do step 1 again.
3.
Angle bracket (4)
Aline holes.
4.
Screw (1) and
Using 7/16-inch box wrench, install.
Iockwasher (2)
There are three screws. Step 4 is
typical for all four screws.
5.
Screw holes (5)
Do step 4 again.
6. Left side of
Angle bracket (6)
Do steps 1 thru 5 again.
power supply
4-20
