LO 9-2350-247-12
LUBRICATION ORDER
(Supersedes LO 9-2350-247-12, March 1982)
8 JULY 1994
KEY
EXPECTED
REFILL
TEMPERATURES*
CAPACITY
INTERVALS
+40F
0F
Above
to
to
(APPROX)
32F
-10F
-65F
LUBRICATING OIL,
PL-M (MIL-L-3150)
As Required
AN - Annually
GENERAL PURPOSE
or Every
Medium
1,500 Miles
PL-M
PL-S
PL-S
LUBRICATING OIL,
PL-S (VV-L-800)
S - 150 Hours,
GENERAL PURPOSE
1,500 Miles
Special
or Semi-annually
Machine Gun Mount
As Required
CLEANER, LUBRICANT
CLP (MIL-L-63460)
CLP
CLP
As Required
CLP
AND PRESERVATIVE
GREASE AUTOMOTIVE
GAA (MIL-G-10924)
AND ARTILLERY
As Required
All Temperatures
Towing Pintle
*For Arctic Operation Refer to FM 9-207
NOTES
NOTE
1. *CLP is an alternate for PL-M and PL-S.
Late model towing pintles do not have grease
fittings and do not require lubrication.
WARNING
Dry cleaning solvent PD-680 is toxic and flam-
2. TOWING PINTLE. Every 1,500 miles or annually,
mable. Death or injury may result. Always use in an
lubricate pintle through two fittings with grease (GAA).
open area with good air flow, away from sparks,
Towing pintle is at rear of carrier.
heat, or flames. Wear protective goggles and gloves.
Do not breathe vapors. Avoid contact with skin,
eyes, and clothes. If you get dizzy while using
solvent, breathe fresh air and get medical help. If
solvent gets on hands, wash them. If solvent gets
in eyes, flush eyes with fresh water and get medical
help immediately. Keep fire extinguisher nearby.
NOTE
Clean grease fittings with dry cleaning solvent (PD-
680, Type Ill, or equivalent) prior to lubrication.
Check/lubricate grease fitting points after
washing or fording.
Card 37 of 40
