LO 9-2350-247-12
LUBRICATION ORDER
(Supersedes LO 9-2350-247-12, March 1982)
8 JULY 1994
KEY
REFILL
EXPECTED TEMPERATURES*
INTERVALS
CAPACITY
LUBRICANTS/COMPONENTS
(APPROX)
+5F to +120F
+40F to -60F
GREASE, AUTOMOTIVE
GAA (MIL-G-10924)
As Required
AND ARTILLERY
S - 150 Hours,
All Temperatures
Steering Control
1,500 Miles
Bearing
or Semi-annually
Foot Brake Pedal
Linkage
For Arctic Operation Refer to FM 9-207
NOTES
NOTE
WARNING
When grease fittings will not accept GAA, notify
Dry cleaning solvent PD-680 is toxic and flam-
unit maintenance.
mable. Death or injury may result. Always use in
an open area with good air flow, away from sparks,
2. FOOT BRAKE PEDAL LINKAGE (M548A3). Every
heat, or flames. Wear protective goggles and
1,500 miles or semi-annually, lubricate linkage with
gloves. Do not breathe vapors. Avoid contact with
skin, eyes, and clothes. If you get dizzy while using
grease (GAA) through fitting. Use grease gun with
solvent, breathe fresh air and get medical help. If
flexible adapter.
solvent gets on hands, wash them. If solvent gets
in eyes, flush eyes with freshwater and get medi-
cal help immediately. Keep fire extinguisher
nearby.
NOTE
CIean grease fittings with dry cleaning solvent
PD-680, Type III, or equivalent) prior to lubrica-
tion. Check/lubricate grease fitting points after
washing or fording.
1. STEERING CONTROL BEARINGS (M548A3).
Every 1,500 miles or semi-annually, lubricate bearings
with grease (GAA) through fitting at each end of
steering control. Use grease gun with flexible adapter.
Remove forward battery under driver's seat (TM 9-
2350-247-20).
Card 21 of 40
