LO 9-2350-247-12
LUBRICATION ORDER
(Supersedes LO 9-2350-247-12, March 1982)
8 JULY 1994
KEY
REFILL
EXPECTED TEMPERATURES*
LUBRICANTS/COMPONENTS
CAPACITY
INTERVALS
(APPROX)
+5F to +12F
As Required
All Temperatures
AN - Annually or
GIA (MIL-G-23827)
GREASE, INSTRUMENT,
Every 1,500
AIRCRAFT
Miles
GAA (MIL-G-10924)
GREASE, AUTOMOTIVE
AND ARTILLERY
S - 150 Hours,
1,500 Miles
OE/HDO (MIL-L-2104D)
or Semi-annually
OR OEA (MIL-L-46167)
INTERNAL COMBUSTION
ENGINE
For Arctic Operation Refer to FM 9-207
NOTES
2. OIL CAN POINTS. Every 1,500 miles, semi-
1. TACHOMETER AND SPEEDOMETER SHAFTS.
annually, or as required, lubricate fan tensioner, door,
Annually, disconnect shafts at both ends (TM 9-2350-
tailgate hinges and latches; control linkage pins and
247-20), remove slotted washers from drive ends of
shafts, and seat control. Use oil (OE/HDO or OEA).
cores, and remove cores from instrument panel end of
shafts. Clean and lubricate cores with grease (GIA)
3. LUBRICATED AT TIME OF ASSEMBLY. Coat
and insert cores in shafts. Install slotted washers and
ends of suspension torsion bar, idler wheel support
connect both ends of shafts. If tacho-
arm spindle and bearings, steering control linkage
meter adapter has a grease fitting, lubricate with
bearing surfaces and pins, and towing pintle shaft.
lubricant GIA sparingly.
Use grease (GAA or GIA) as specified during assem-
bly procedure.
Card 17 of 40
