TM 9-2320-366-20-4
7-108. M1089 BOOM UP SOLENOID CABLE REPLACEMENT (CONT)
b. Installation.
(1) Install boom up solenoid cable (1) through compression
nut (2), washer (3), and connector (4).
(2) Install compression nut (2) on connector (4).
(3) Install quick disconnect terminal (5) on black wire (6).
(4) Install terminal lug (7) on white wire (8).
(5) Install quick disconnect terminal (5) on ground strip (9)
position 18.
(6) Install terminal lug (7) on terminal block (10) position 13
with screw (11).
(7) Apply varnish to quick disconnect terminal (5) and
terminal lug (7).
7-548