TM 9-2320-366-20-4
7-107. M1089 BOOM UP LOCKOUT SOLENOID CABLE REPLACEMENT (CONT)
b. Installation.
(1) Install boom up lockout solenoid cable (1) through
compression nut (2), washer (3), and connector (4).
(2) Install compression nut (2) on connector (4).
(3) Install quick disconnect terminal (5) on black wire (6).
(4) Install terminal lug (7) on white wire (8).
(5) Install quick disconnect terminal (5) on ground strip (9)
position 19.
(6) Install terminal lug (7) on terminal block (10) position 19
with screw (11).
(7) Apply varnish to quick disconnect terminal (5) and
terminal lug (7).
7-544