TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
MHC erected (TM 9-2320-366-10-2).
Dispenser, Pressure Sensitive Adhesive Tape
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (para 7-57).
Tools and Special Tools
a. Removal.
NOTE
Remove plastic cable ties as required.
(1) Remove eight screws (1), lockwashers (2), and washers
(2) Remove two self-locking nuts (5), four washers (6), two
screws (7), and control panel top cover (4) from control
panel (8). Discard self-locking nuts.
NOTE
Tag wires and connection points prior to
disconnecting.
(3) Loosen screws (9 and 10) on terminal board (11)
positions 7A and C.
(4) Remove black wire (12), green wire (13), and shield (14)
from terminal block (11).