TM 9-2320-272-24-3
4-161. ELECTRICAL LOAD CENTER BOX MAINTENANCE
THIS TASK COVERS:
c. Assembly
a. Removal
d. Installation
b. Disassembly
INITIAL SETUP:
MANUAL REFERENCES (TM)
APPLICABLE MODELS
M934/A1/A2
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
TM 9-237
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
MATERIALS/PARTS
l Parking brake set (TM 9-2320-272-10).
l Battery ground cables disconnected (para. 3-126).
External power source disconnected
Sealing compound (Appendix C, Item 62)
l
(TM 9-2320-272-10)
a. Removal
NOTE
Tag wires for installation.
1.
Remove
six screws (1) and cover (2) from load center (7).
2.
Remove
three screws (20) and wires (3) from relay (6).
3.
Remove
screw (14) and wire (19) from neutral buss bar (8).
4.
Remove
screws (13) and (14) and two wires (16) and (17) from circuit breakers (10) and (9).
5.
Remove
screw (12) and wire (15) from circuit breaker (11).
6.
Remove
screw (4), clamp (5), and right main wiring harness (21) from load center (7).
7.
Remove
three screws (34) and wires (22) from relay (6).
8.
Remove
screw (32) and wire (33) from neutral buss bar (8).
9.
Remove
screw (28) and wires (31) from circuit breaker (23).
10.
Remove
screw (27) and wires (30) from circuit breaker (24).
11.
Remove
screw (26) and wire (29) from circuit breaker (25).
12.
Remove
left main wiring harness (35) from load center (7).
4-776