TM 9-2320-272-24-3
4-160. FLEXIBLE CONVERTER WIRING HARNESS MAINTENANCE
THIS TASK COVERS:
c. Installation
a. Removal
b. Repair
INITIAL SETUP:
MANUAL REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
M934/A1/A2
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Gasket (Appendix D, Item 211)
Lockwasher (Appendix D, Item 390)
a. Removal
NOTE
Tag wires for installation.
1.
Remove
connector (10) from junction box (11).
2.
Remove
four screws (1), cover (2), and gasket (3) from converter (5). Discard gasket (3).
3.
Remove
three nuts (7), wires (8), and lockwasher (6) from converter (5). Discard lockwasher (6).
4.
Remove
wiring harness (9) from van body (4).
b. Repair
For van wiring harness repair, refer to para. 3-131.
c. Installation
1.
Install
wiring harness (9) on van body (4).
2.
Install
three wires (8) and new lockwasher (6) on converter (5) with three nuts (7).
3.
Install
new gasket (3) and cover (2) on converter (5) with four screws (1).
4.
Install
connector (10) on junction box (11).
4-774