TM 9-2320-272-24-3
4-120. STEERING GEAR (SHEPPARD) REPAIR (Contd)
26.
Remove oil real (14) from steering gear housing (15). Discard oil seal (14).
27.
Remove bearing (13) from steering gear housing (15).
Using 0.078152 in. (2.0 mm) drill, drill lockpin (6) out of bearing cap (10). Discard lockpin (6)
28.
remains.
29.
Remove bearing retainer (1) from bearing cap (10). Discard bearing retainer (1).
30.
Press input shaft (2) and bearing (3) out of bearing cap (10).
31.
Remove seals (9) and (8), high-pressure seal (4), and washer (6) from bearing cap (10). Discard high-
presrure seal (4), washer (6), and seals (8) and (9).
Remove grease fitting (7) from bearing cap (10).
32.
Remove bearing (11) from output shaft cover (12).
33.
4-644