TM 9-2320-392-10-2
M1083A1 SERIES PREVENTIVE MAINTENANCE
0103 00
CHECKS AND SERVICES (PMCS) - Continued
LUBRICATION SERVICE INTERVALS - NORMAL CONDITIONS - Continued
WARNING
Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear
protective goggles and gloves; use only in well-ventilated area;
avoid contact with skin, eyes, and clothes; and do not breath
vapors. Keep away from heat or flame. Never smoke when using Dry
Cleaning Solvent; the flashpoint for Type l Dry Cleaning Solvent is
100 F (38 C) and for Type II is 138 F ( 50 C). Failure to comply
may result in serious injury or death to personnel.
If personnel become dizzy while using Dry Cleaning Solvent
immediately get fresh air and medical help. If Dry Cleaning Solvent
contacts skin or clothes, flush with cold water. If Dry Cleaning
Solvent contacts eyes, immediately flush eyes with water and get
medical attention. Failure to comply may result in serious injury or
death to personnel.
Cleaning Fittings Before Lubrication. Clean parts with Dry Cleaning Solvent (SD ll, P-
D-680) or equivalent. Dry before lubricating. Dashed arrows indicate lubrication on both
sides of equipment.
Lubrication After Fording. If a fording operation occurs, lubricate all fittings below
fording depth and check submerged gear boxes for presence of water.
Lubrication After High-Pressure Washing. After a through washing, lubricate all
grease fittings and oil can points outside and underneath vehicle.
Lubrication Local Views. A reference to the appropriate localized view is given after
most lubrication entries.
Corrosion Control
Refer to WP 0001 00 for appropriate corrosion control procedures.
0103 00-5
