TM 9-2320-392-10-2
STEERING SYSTEM TROUBLESHOOTING - Continued
0090 00
STEERING SYSTEM - Continued
Table 1. Steering System Troubleshooting Procedure - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
NOTE
Perform Brake System Troubleshooting (WP 0085 00, Malfunction 5,
Vehicle Brakes Unevenly, or Brakes Pull to One Side or Grab), before
starting here.
2. WANDERS, PULLS TO
1. Check wheel studs
WARNING
ONE SIDE, OR
and lugnuts for
Notify Field Maintenance that
SHIMMIES
obvious looseness.
lugnuts need to be tightened
to 415-475 lb-ft (563-644 Nm)
as soon as possible. Wheel
may come loose if lugnuts are
not tightened to proper
torque. Failure to comply may
result in serious injury or
death to personnel.
If loose, tighten.
2. Check for bent or
Notify Field Maintenance if two
broken studs and
or more lugnuts or studs on the
missing or loose
same wheel are missing,
lugnuts.
broken, or bent.
3. Check if tire
1. Set CTIS to HWY mode (WP
pressures is sufficient
0022, Normal CTIS Operation).
in CTIS HWY mode.
0090 00-3
