TM 9-2320-392-10-2
STEERING SYSTEM TROUBLESHOOTING - Continued
0090 00
STEERING SYSTEM - Continued
Table 1. Steering System Troubleshooting Procedure - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. HARD TO STEER -
3. If oil level is over full mark,
Continued
notify Field Maintenance.
4. Lower cab (WP 0021 00).
2. Check if tire
1. Set CTIS to HWY mode WP
pressures is sufficient
0022 00, Normal CTIS
in CTIS HWY mode.
Operation).
2. Check pressure of each tire
with tire inflator-gage.
3. If tire pressures are greater
than or less than those given
below, perform CTIS
troubleshooting (WP 0088 00,
Malfunction 5, CTIS ECU Lights
Illuminate but CTIS Fails to
Inflate or Deflate).
All Models Except M1088A1 and
M1089A1:
HWY Mode
60 psi (414 kPa)
Models M1088A1 and M1089A1:
HWY Mode
81 psi (558 kPa)
4. Shut down engine (WP 0018
00).
3. Check to see if
1. Start engine.
vehicle is hard to
steer.
2. Road test vehicle.
3. If vehicle is still hard to steer,
notify Field Maintenance.
4. Shut down engine.
0090 00-2
