TM 9-2320-392-10-2
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued 0080 00
ELECTRICAL SYSTEM Continued
Table 3. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
108. RADIO DOES NOT
1. Check circuit breaker
1. Remove PDP cover (WP 0113
OPERATE
CB20 in PCB to see if
it is tripped.
2. If circuit breaker is tripped,
push in to reset.
3. Position master power switch
to on (WP 0004 00).
4. Position radio to on.
5. Position radio to off.
6. Check circuit breaker to see if
it is tripped again. If circuit
breaker is tripped or trips
again, notify Field
Maintenance.
7. Position master power switch
to off (WP 0004 00).
8. Install PDP cover (WP 0113
0080 00-106
