TM 9-2320-392-10-2
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued 0080 00
ELECTRICAL SYSTEM Continued
Table 3. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
98. CENTRAL TIRE
2. If circuit breaker is tripped,
INFLATION
push in to reset.
SYSTEM (CTIS)
ECU DOES NOT
DIM IN BLACKOUT
MODE - Continued
3. Position master power switch
to on (WP 0004 00).
4. Check circuit breaker to see if
it is tripped again. If circuit
breaker is tripped again, notify
Field Maintenance.
5. Position master power switch
to off (WP 0004 00).
6. Install PDP cover (WP 0113
2. Check to see if CTIS
If CTIS ECU does not dim in
ECU mode light dims
blackout mode, notify Field
in blackout mode
Maintenance.
(WP 0018 00
99. 15K SELF-
1. Check to see if PTO
If PTO does not operate,
RECOVERY WINCH
operates (WP 0065
perform Malfunction 102
(SRW) DOES NOT
00).
(Power Take-Off {PTO Does
REEL IN OR PAY
Not Operate}).
OUT
2. Check to see if 15K
If 15K SRW does not operate,
SRW operates (WP
notify Field Maintenance.
0065 00).
100. 15K SELF-
1. Check to see if 15K
If 15K SRW does not pay out,
RECOVERY WINCH
SRW pays out (WP
perform Malfunction 99 (15K
(SRW) DOES NOT
0065 00).
Self-Recovery Winch (SRW)
REEL IN
Does Not Reel In Or Pay Out).
2. Check to see if 15K
If 15K SRW does not reel in,
SRW reels in (WP
notify Field Maintenance.
0065 00).
0080 00-95
