TM 9-2320-392-10-2
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued 0080 00
ELECTRICAL SYSTEM Continued
Table 3. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
37. ENGINE OIL
1. Is vehicle S/N 11,438
1. If vehicle S/N is 11,438 to
PRESSURE / LOW
to 99,999?
99,999 go to test 2 of this
OIL PRESSURE
malfunction.
INDICATOR
2. If vehicle S/N is not 11,438 to
ILLUMINATES
99,999 go to test 3 of this
WHILE ENGINE IS
malfunction.
RUNNING /
REMAINS
2. Does engine OIL
1. Start engine (WP 0018 00).
ILLUMINATED 10
PRESS gage read
SECONDS AFTER
2. Check to see if engine OIL
greater than 12 PSI
ENGINE STARTS
PRESS gage reads greater
while engine is
than 12 PSI while engine is
running?
running (WP 0004 00).
3. Shut down engine (WP 0018
00).
4. If engine OIL PRESS gage
reads 12 PSI or less, perform
Engine System
Troubleshooting (WP 0076 00
Malfunction 3. Low Engine Oil
Pressure).
5. If engine OIL PRESS gage
reads greater than 12 PSI,
notify Field Maintenance.
WARNING
Ensure engine oil is cool before performing any maintenance.
Failure to comply may result in serious injury to personnel.
3. Is engine oil at
1. Pull engine oil dipstick from
proper level?
dipstick tube.
2. Wipe oil dipstick clean.
0080 00-49
