TM 9-2320-392-10-1
SNATCH BLOCK INSTALLATION/REMOVAL - Continued 0073 00
INSTALL SNATCH BLOCK ON 30K WINCH CABLE - Continued
10. Continue with 30K Winch Operation (WP 0035 00).
REMOVE SNATCH BLOCK FROM 30K MAIN WINCH CABLE
CAUTION
Ensure that there is enough slack in cable before removing cable from snatch
block. Failure to comply may result in damage to equipment.
1.
Remove clevis pin (2) from screw (3).
2.
Loosen screw (3) in snatch block (1).
3.
Move plate (4) to side to open snatch block (1).
4.
Remove cable (5) from snatch block (1).
5.
Close plate (4) and align holes.
6.
Tighten screw (3) in snatch block (1).
7.
Remove snatch block (1) from mired vehicle (FM 20-22)
8.
Clean and inspect snatch block (1) for damage (FM 20-22).
9.
Lubricate snatch block (1) (WP 0103 00, Table 17, Item 1)
10. Stow snatch block (1) in tool box.
11. Continue with 30K winch operation (WP 0035 00).
END OF WORK PACKAGE.
0073 00-2
